Bracing
Hilltop Bracing
Hilltop Manufacturing is a leader in lightweight ICF bracing.
- Utilization of aluminum results in a strong product that is extremely light in weight.
- Stackable storage crate for sets of 40 and includes welded lifting hooks for easy maneuverability on the jobsite.
- Comes in custom colours and several length options.
| BRACING SYSTEM | |||
|---|---|---|---|
| 8' | 9 | 10' | 12' |
| Transport Crate (40 braces per crate) Individual parts available Sold per piece or complete set |
|||
Plumwall Bracing
Plumwall Insulated Concrete Form Bracing is a leading innovator in the field of easy-to-use ICF bracing systems.
- Engineered with exclusive one-man alignment control at platform level and are built for insulated concrete forms up to 24 feet high.
- Faster setup with the Plumwall’s one step measure and adjust ability
- Available transportation and stackable storage crates hold 24 Plumwall ICF braces and comes in a selection of standard or custom colours.
| ALL-IN-ONE BRACE | |||
|---|---|---|---|
| 8' | 9 | 10' | 12' |
| 10 ft Transport Crate (24 braces per crate) | |||
| 12 ft Transport Crate (24 braces per crate) | |||
| Individual parts available Sold per piece or complete set |
|||
Fab-Form ZEE T-Bracket
ZEEs are a great alternative to use instead of T-Blocks. The ZEE T-Brackets eliminate 3 marriage lines per T-junction, which allows for faster ICF installation and reduced ICF waste.
Each ZEE is manufactured from high-quality zinc plated steel and weighs just 2.9 lbs, making it easy to install using 1-1/2" x #8 deck screws.
Burmon Buck Brace
The patent pending, Burmon Buck Brace is engineered to brace the horizontal pressures of the concrete during the pour in the window and door bucks.
The Burmon Buck Brace eliminates all horizontal wood bracing; saving on lumber and labor costs by reusing these braces for years to come.
This brace adjusts to fit our 4”, 6”, 6.5”, and 8” Superform ICF Blocks.
Waterproofing
Soprema
Soprema is a high-quality, self-adhesive, rubberized peel and stick sheet designed for damp-proofing SuperForm ICF construction. Benefits include high tensile strength and puncture resistance, greater flexibility and consistent thickness, ensuring the high-end waterproofing required to give you peace of mind that your below-grade builds won’t leak.
Wall Coverage - 200 sq. ft. (includes overlap)
AVAILABLE IN
| WIDTH | LENGTH |
|---|---|
| 3' | 75’ per roll |
| Sold per roll or per pallet (30 per pallet) | |
Elastocol Stick H2O
Polymer emulsion-based primer designed to improve the adhesion of self-adhesive waterproofing membranes on most substrates. It is an excellent choice when the use of solvent-based primer is not recommended.
Benefits
- Cold application
- Single component (ready to use)
- Coverage - 800 sq. ft. per bucket
Sold per bucket
Sopraseal Sealant
High-performance, moisture cure, solvent and isocyanate free polyether sealant (STPE) with low VOC content. With its adhesive properties, Sopraseal Sealant is designed to seal wall details.
High-performance, moisture cure, solvent and isocyanate free polyether sealant (STPE) with low VOC content. With its adhesive properties, Sopraseal Sealant is designed to seal wall details.
Benefits
- Excellent adhesion to most construction materials including SOPRASEAL self-adhesive membranes
- Solvent and isocyanate free
- Very quick curing time
- Coverage - 150 LF per tube
Sold per box (24 tubes per box)
Neophrene Roller
When installing Soprema, rolling it with a Neophrene Roller provides up to 400 times more adhesion and makes the job easier to complete.
Note: In order to be covered under warranty,
a Neophrene Roller must be used when installing Soprema.
- Sold individually
Tarps
Our 1-piece plastic tarp is available in material designed to (1) cover the entire perimeter wall when nailed to the ties along the top, and (2) protect from UV exposure.
AVAILABLE IN
| WIDTH | LENGTH |
|---|---|
| 6' | 180’ |
| 8' | 180’ |
| 10' | 180’ |
| 12' | 180’ |
| Sold individually | |
SUPERSEAL Dimpled Foundation Membrane
SUPERSEAL Dimpled Membrane is made from tough, long lasting plastic that keeps exterior moisture out. It prevents backfill material from touching the foundation wall and bridges typical wall cracks with ease and can be backfilled right away. The dimples in the membrane create a drainage space that allows the wall to breathe. This space allows moisture to condensate outward on to the membrane. By gravity, the moisture then falls to the footing drain for removal.
Wall Coverage – 518 sq. ft. (7’11”) or 583 sq. ft. (8’ 11”)
AVAILABLE IN
| WIDTH | LENGTH |
|---|---|
| 7'11" | 65.5' per roll |
| 8'11" | 65.5' per roll |
| Sold per roll | |
Membrane Cap
The Membrane Cap is a piece of plastic that seals all open edges. It is L shaped and smooth on the back. It can be installed horizontally, vertically, and on any angle. You can use the Membrane Cap throughout the entire job.
SuperPlug
Each plug has 5 dimples that interlock into the membrane providing superior holding strength over a single plug. Recommended for all areas.
- 50 per bag
- Sold per bag
ICF Hangers
Simpson Tie ICFVL Ledger System
The ICFVL ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system offers many benefits over traditional anchor bolting, including better on-center spacing in most cases, faster installation and no protrusions.
ICFVL
The embedded legs of the ICFVL are embossed for additional stiffness and the hole enables concrete to flow through and around the connector. The exposed flange on the face of the ICF provides a structural surface for mounting either a wood or steel ledger.
| ICFVL | 15 per box | |
| Sold per box | ||
ICFVL – CW/W
The CW/W (J Hook) Ledger attachment slips over the appropriate ledger connector under the ledger. 8 screws are installed through the CW/W into the ICFVL Plate holding up to 1940lbs per hanger.
| ICF-CW | 1.75" | 15 per box |
| ICF-W | 1.5" | 15 per box |
| Sold per box | ||
Burmon Hurricane Anchor - BHBCON Concrete Connection
The ICF Hurricane Anchor has been specially designed for North America’s conditions and modern ICF concrete building techniques to deliver safer, more efficient and higher load rafter/truss anchor connections that deliver significant cost savings over the total house build. The connector is installed before concrete sets and the truss is then placed inside the bracket and fixed using Burmon roofing screws. This finishes the tie-down of the trusses, eliminating the hassle of going back later to nail off connectors. This feature connected directly to the concrete provides one of the strongest roof tie-down connections available.
| BHBCON - Concrete Connection (hurricane anchor connected cast into concrete) |
30 per box |
| Sold per box | |
Burmon Hurricane Anchor - BHBSP Mudsill Connection
The revolutionary Burmon design enables the anchor to be securely fixed directly to the top plate. Using a cordless impact driver, simply attach the bracket to the top plate using Burmon panhead screws. The truss is then placed inside the bracket and fixed using Burmon roofing screws. This finishes the tie down of the trusses eliminating the hassle of going back later to nail off connectors. The Hurricane Anchor is faster and easier to install than ordinary conventional connectors whilst delivering a stronger tie down over the whole roof.
| BHBSP - Mudsill connection (hurricane anchor connect to mud sill plate) |
50 per box |
| Sold per box | |
Burmon ICF Ledger Connector - ICFWL
Burmon’s ICF Wood & Steel Ledgers utilize the Burmon ICF Connector System, a revolutionary double threaded cylinder bolt assembly that connects and anchors wood ledger brackets, wood and steel ledgers, joist hangers, I- joists, beams and trusses to insulated concrete forms (ICF) walls. This is a fast, easy to install, and extremely strong way to attach a ledger, saving you time and money.
| Wood Ledger | 10 per box |
| Sold per box | |
Spray Foam
Foam
The Low Expansion Foam is compatible with SuperForm’s Expanded Polystyrene (EPS) foam and can be used for a number of different tasks on-site including foaming the forms to each other between vertical joints, securing service penetrations, and as insulation around openings.
| 12 bottles per box |
| Sold per box |
Cleaner
The Foam Gun Cleaner is used to clean the internal chamber of the foam gun from any hardened foam. Also used on the external surfaces for cleaning the guns.
| 6 per box |
| Sold individually or per box |
Gun
The metal handle Foam Gun is compatible with the SuperForm’s Low Expansion Foam 24oz (680g) cans. The SuperForm’s Low Expansion Foam can be used for a number of different tasks on site.
| Sold individually |
Ties, Screws, Tape
Super Slick
Want an easier way to unload SuperForm ICF from your trailer? Try our in-house, Super Slick! Made from our EPS foam beads, all you need to do is sprinkle them onto the floor of your trailer to make unloading a breeze.
ICF Easy Puller
Our ergonomic friendly ICF Easy Puller is designed to pull any type of block, including corners and T’s, from the back of the trailer without needing to bend over. The angles are foldable for compact storage and are perfectly designed not to damage the ICF unlike other pullers that dig into the foam.
SuperForm 4” Tape
The 4" SuperForm Tape is used to cover the interlock system on the top of a wall to prevent concrete from flowing into the interlocking locking knobs during the concrete pour. The dimensions are 4” wide X 215’ long.
- 30 rolls per box
- Sold individually or per box
4" Top Loader Tape Dispenser
SuperForm now offers an easier way to apply our SuperForm tape! This tape dispenser allows for smooth tape application and has sturdy side plates to protect the tape.
- Sold individually
Wire Ties
SuperForm wire ties are bent ties used to hook one row of blocks to the one above them. You can use these at each corner or secure the top row to the one below it to hold it tight.
| 6" | 100 per box |
| 6.5" | 100 per box |
| 8" | 100 per box |
ICF Screws
ICF screws by ClearCo Fasteners are the perfect option for attaching to SuperForm. The screw features a loose washer design and each screw is hardened and galvanized. They are course thread which provides maximum attachment to SuperForm’s plastic webs.
| 2" | 500 per box |
| 3" | 500 per box |
Fiber Tape
Fiber Tape is used to provide additional EPS support for field cut forms that have more than 4” (100mm) of EPS extending past the last web, brick ledge forms in corner conditions, and radius panel.
- 9 rolls per sleeve
- Sold per sleeve
Devil Washers
Is a engineered fastener system used with deck screws to fasten EIFS to varies wall surfaces.
- 500 or 1000 per box
- Sold per box
Technical Resources
Click the buttons below to learn more about the specifications, benefits, and how to use SuperForm products on SuperFormICF.com
